Job Opening for Protection Engineer in Noida | Technitab Solutions

Protection Engineer Job

Testing & Commissioning of Control and Relay Protection panels along with relay configurations, relay settings calculations, Retrofitting jobs for CRP, supervision of installation for pre-requisites of commissioning at reputed companies like Siemens / ABB / GE / Schneider / SEL / Alstom / Areva related project sites at India / Abroad. Employees are eligible for Site allowances, incentives & bonuses apart from monthly salary. Salary hike from 20% to 40%. Contract employment positions are also available.


  • Testing, commissioning of protection System CRP
  • Interface with customers, including trouble shooting and commissioning support
  • The candidate will be required to travel to project sites


  • Communication Network Technologies, including design, configuration, and troubleshooting
  • Hands on experience on the Communication protocols such as IEC61850, 104, 103, 101, OPC and Modbus
  • Hands on experience on the Siemens Siprotec , Reyrole Protection Devices i.e. Distance, Differential, EF/OC, Bus Bar, Generator and associated software packages i.e. DIGSY- 4 & 5.
  • Hands on experience on the Siemens, Areva, GE, Alstom, ABB protection devices.


  1. Testing & Commissioning of Protection Systems of all types of Relays including Electromechanical to Numerical Relays of all Manufacturers (ABB, Siemens, AREVA)
    • Generator Protection
    • Transformer Protection
    • Bus bar Protection
    • Feeder Protection
    • Line Differential Protection
    • Backup Protection
    • Over current and earth fault
    • Backup Protection Relay
  2. Erection / Installation/ Laying, Testing & Commissioning of all the equipment / material as covered in the BOQ
  3. Preparation of Cable Schedule
  4. Retrofitting and Revamping Activities of all types of Protection System, Control & Relay Panels, Switchgear Panels, Transformers, Motors
  5. Testing and commissioning of power system products.
  6. Relay settings calculations and Numerical Relays programming.
  7. Bus wire termination between the new panels
  8. New panels scheme checking
  9. Topology Preparation as per SLD
  10. Relay configuration (all PU + CU), Annunciator FACIA configuration & Time display unit configuration
  11. Testing all Busbar relays include all PU’s, GRP, CRP panels/relays
  12. Test Report Preparation and Cable/Material utilization list
  13. Connecting all the bays CT with our new Busbar Scheme
  14. Connecting all the bays tripping with our new Busbar Scheme
  15. Final handover of complete busbar scheme to customer without any pending punch point

Experience: Minimum 1 yrs
Salary: Salary no bar for right candidate. As per industry standard.
Salary: INR 1,75,000 – 5,00,000 P.A. Salary hike from 20% to 40% – send your CV to

IndustryElectricals / Switchgears
Functional AreaSite Engineering, Project Management
Role CategorySite Engineering
RoleElectrical Engineer-Utility
Employment TypePermanent Job, Full Time


siemens, commissioning, installation, protection engineer, digsi 5, digsi 4, sigra, netview, omicron, numerical relay, areva relays, abb relays, siemens relays, schneider relays, 7sj647, 6md66, 7sj61, 7sj62, 7sj80, 7ut613, 7sd52, 7sj64, 7ss522, rec670, ref630, ref615

Desired Candidate Profile


      • BE / B.Tech / Diploma in Electrical Engineering
      • Minimum one year of relevant experience in the Protection and Control Engineering field, Preferably with Siemens CRP Systems
      • Lesser experience (3 months to 6 months) can be placed as Graduate Trainee Engineers if selected


      • Prior experience in the power industry, including applied knowledge of electrical engineering, schematics, one and three lines
      • Applied knowledge of transmission and distribution numerical relay and protection.
      • Experience with Numerical Relays like:-
        • Bay control units- (7SJ647 & 6MD66)
        • Non-Directional & Directional O/C & E/F relay – (7SJ61,7SJ62 & 7SJ80)
        • Transformer & Line Differential protection – (7UT613 & 7SD52)
        • Pilot wire differential relay
        • Synchronous check relay- (7SJ64)
        • Busbar protection relay-(7SS522)
        • Bay control units(REC670, REF630)
        • Over current & Earth fault protection relays- ABB(REF615)
        • Electromagnetic relays-ABB


      • Knowledge of ANSI standards, IEC standards.
      • High Voltage, Distribution and Generation applications experience, working for Utility and Industrial customer
      • Experience in Retrofitting and Revamping Activities of Protection, Control & Relay Panels, Switchgear Panels, Transformers, Motors:
        • Generator Protection
        • Transformer Protection
        • Bus bar Protection
        • Feeder Protection
        • Line Differential etc


  • UG: B.Tech/B.E. – Electrical, Diploma – Electrical
  • PG: Post Graduation Not Required
  • Doctorate: Doctorate Not Required


Send CV on Email:
Call on Mobile: +91 8851126642

Apply via: